JVC HR-J259EE Press SP/LP to set the tape speed, VPS Recording on, Possible with this recorder

1

NUMBER 4

VPS 7

STOP+/–

PROG. 1

2

5

DAILY3

6

9

2

4

WEEKLY

TIMER

EN23

		SET TAPE SPEED (HR-J459EE ONLY)
4 Press SP/LP ( ) to set the tape speed.
5		SET VPS MODE
		Press VPS (NUMBER key "7") to select "ON" or "OFF".
		If "VPS/PDC OFF" is displayed on the screen or "VPS/
		PDC" is lit on the display panel, VPS is set to OFF.
	If "VPS/PDC ON" is displayed on the screen or "VPS/PDC"
		is not lit on the display panel, VPS is set to ON.
	☞ "VPS Recording" on page 25.
		● PDC (Programme Delivery Control) recording is not
		possible with this recorder.
		RETURN TO NORMAL SCREEN
		Press PROG. or OK. "PROGRAM COMPLETED"
		appears on the screen for about 5 seconds, then normal
6 screen appears.

	SP/LP
3	OK

PUSH JOG

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

●Press the NUMBER keys or PUSH JOG %Þto input the channel position number on which your recorder

receives that station, then press OK or PUSH JOG %. The SHOWVIEW program screen appears.

	● Repeat steps 1 – 6 for each additional programme.
7	ENGAGE RECORDER’S TIMER MODE
	Press TIMER. The recorder turns off automatically and
	äappears on the display panel.
	● To disengage the timer, press TIMER again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).

●It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with "0".

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

1Perform steps 1 – 7.

2Set the satellite tuner to the appropriate channel before the selected programme begins.

3Leave the satellite tuner's power on.

GUIDE PROG SET

GUIDE PROG	TV PROG
2	– –
[5°] =
[PROG] : EXIT

(Ex.) To timer-record a RTR programme with SHOWVIEW.

*If your recorder receives RTR on the channel position 2, press OK or PUSH JOG % after entering "2".