JVC HR-J459EE, HR-J259EE Express Timer Programming, Access Showview, Access Programme, Start Time

24ENTIMERRECORDING(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS SHOWVIEW
	SCREEN
1 Press PROG..
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re		– P1 –
	just starting out, “P1”
		START	STOP
2 appears.)
		– –:– –	= – –:– –
		SP	VPS/PDC OFF
		DATE	TV PROG
		– –.– –	– –
		[+/–] =
		[PROG] : EXIT

1

PS

4

7

TOP+/ –

2

5

DAILY3

6

9

2

4

WEEKLY

TIMER

The front display panel looks like this:

SP

"SP" is not displayed with the HR-J259EE.

ENTER PROGRAMME

TV PROG+/–

START+/–

PROG.	1		DATE+/
			–
			SP/LP
		3	OK

	START TIME
	Press START +/– to enter		– P1 –
	the time you want	START		STOP
3 recording to start.
		21:00	= – –:– –
	● Press and hold START	SP	VPS/PDC OFF
	+/– to move in 30-	DATE		TV PROG
	minute increments, or	– –.– –		– –
	press and release	[+/–] =
	repeatedly to move 1
		[PROG] : EXIT
	minute at a time.
	The front display panel looks like this:
	SP

	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.

5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)