JVC HR-J268EU, HR-J468EU Link Functions, Access Mode SET Screen, NexTView Link, TV Auto Power On

T-VLINK

EN11

T-V Link

Functions

When you connect the recorder and your TV via fully-wired 21-pin SCART cable (☞ pg. 3), the following functions are available. You can use these functions only with the TV offering T-V Link, etc.*

For details, refer to the instruction manual for your TV.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully- wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

NexTView Link

You can download the EPG (Electronic Programme Guide) information from your TV for timer-programming on the recorder.

For details, refer to the instruction manual for your TV.

TV Auto Power On

You can turn on the TV and set it to video mode automatically whenever you play a tape.

For details, refer to the instruction manual for your TV.

VCR Auto Standby

You can use your TV's remote control to turn off the recorder. For details, refer to the instruction manual for your TV.

Direct Rec

You can start recording the programme that you are watching on your TV with simple operation. Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder.

Follow the procedure below to use this function.

TURN ON THE RECORDER

1 Press			.
		ACCESS MAIN MENU
		SCREEN
2 Press MENU.
		ACCESS MODE SET
3		SCREEN
	Press %Þ to move the				MAIN MENU
		highlight bar (pointer) to
					MODE SET
		"MODE SET", then press
					AUTO CH SET
		OK or #.			MANUAL CH SET
					INITIAL SET
				[5°] =
					[MENU] : EXIT
4		SELECT DIRECT REC MODE
	Press %Þ to move the				MODE SET
		highlight bar (pointer) to			B. E. S. T.	ON
		"DIRECT REC", then press
					PICTURE CONTROL	AUTO
		OK or #to set to "ON".			AUTO TIMER	OFF
					O. S. D.	ON
		● "AUTO SP→LP TIMER"			DIRECT REC	ON
					AUTO SP=LP TIMER	OFF
		appears only with the			POWER SAVE	ON
		HR-J468EU.			NEXT PAGE
					[5°] =
					[MENU] : EXIT
		RETURN TO NORMAL
		SCREEN
5 Press MENU.

NOTES:

•If "DIRECT REC" is set to "OFF", the RECORD button functions as described in "Basic Recording" (☞ pg. 17) .

•During the Direct Rec, "CH – –" appears on the display panel.

•When you perform T-V LINK functions, be sure to use the fully-wired 21-pin SCART cable.