30 EN
Edit To OrFrom AnotherVideoRecorder
You can use your video recorder as the source player or the
recording deck.

MAKE CONNECTIONS

1
Connect the player’s 21-pin SCART (AV) connector to
the recorder’s 21-pin SCART (AV) connector as
illustrated on page 31.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.

SET RECORDING DECK’S

INPUT MODE

2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — “L-1” for the AV1 IN/OUT
connector, or “L-2” for the AV2 IN/DECODER connector.
●When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (Z pg. 31).

SET EDIT MODE

3
See "Picture Control" on page 16.

START SOURCE PLAYER

4
Engage its Play mode.

START RECORDING DECK

5
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select EDIT to dub tapes in step 3, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
●
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
Z
pg. 9).
123
456
789
0
2
4
1
3
?
NUMBER "0"
TV PROG
OK
MENU

EDITING (cont.)