Colour System Set, About Ntsc Playback | JVC HR-J468EU, HR-J311EU

12EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

1 2 3

2

4 5 6

7 8 9

0

4

1

?

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press

.

ACCESS MAIN MENU

SCREEN

2 Press MENU.

ACCESS MODE SET SCREEN

Press %Þ to move the

MAIN MENU

highlight bar (pointer) to

3 "MODE SET", then press

MODE SET

AUTO CH SET

OK or #.

MANUAL CH SET

INITIAL SET

[5°] =

[MENU] : EXIT

SELECT COLOUR SYSTEM

MODE

Press %Þ to move the highlight bar (pointer) to

"COLOUR SYSTEM", then press OK or # to select the

4 appropriate colour system.

HR-J468EU

HR-J311/268EU

MODE SET

MODE SET

PREVIOUS PAGE

PREVIOUS PAGE

AV2 SELECT

AV2

COLOUR SYSTEM PAL/NTSC

COLOUR SYSTEM PAL/NTSC

[5°] =

[5°] =

[MENU] : EXIT

[MENU] : EXIT

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

RETURN TO NORMAL

SCREEN

5 Press MENU.

Image 12

JVC HR-J468EU, HR-J311EU, HR-J268EU Colour System Set, About Ntsc Playback, Press %Þ to move the highlight bar pointer to

Contents

HR-J468EU HR-J311EU HR-J268EU Safety Precautions For ItalyTo HR-J468EU Owners To HR-J311/268EU Owners Check Contents Basic ConnectionsSituate Recorder Connect Recorder to Mains Auto Set Up If you are referring to the front display panelIf you are referring to the on-screen display International Telephone Country Code Language Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to This Preset Download ENU If both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock on Language Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal Screen Power Save Mode Access Mode SET Screen TV Auto Power OnLink Functions NexTView Link Colour System Set About Ntsc PlaybackPress %Þ to move the highlight bar pointer to Colour SYSTEM, then press OK or # to select Basic Playback Load a CassettePoint Start Playback Playback Features PlaybackActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to Automatic Select Picture Control SET Mode Auto SP→LP Timer appears only with the HR-J468EURepeat Playback Picture Control Basic Recording Recording Features Reset CounterSelect Channel to Watch SET Counter Display Engage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorder S.T. Picture System Preparation#to set to on or OFF Recording PlaybackOr press Record on the recorder Timer Programming Timer Warning Satellite Tuner UsersPress SP/LP Express Timer Programming Before performing Express Timer ProgrammingStart Time Time SET VPS/PDC Mode Timer ModeSET Tape Speed HR-J468EU only Engage RECORDER’S Check, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmes Auto SP→LP Timer HR-J468EU only Auto TimerFor Example OK or #to select either Prog REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder Input Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source Player AV2 Select Setting RecorderHR-J468EU HR-J311/268EU Connection To Satellite Tuner Satellite Tuner UnitBack of TV Back of Recorder Decoder Set AV2 Select to AV2. pg Connecting Using a Decoder Select Input ModeConnect Decoder SET Tuner Showview Setup NumberEnter Receiving Channel Position Number Guide Program Number Set Access Auto CH SET Tuner SetAuto Channel Set Language of your choice Perform Auto Channel SET View Confirmation Screen Storing Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move begins Access Manual Channel SET Screen Perform TuningAccess Manual Switch Stations TV Station And ID List Clock Set Turn the Recorder onSET Date and Time Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel position to the number representing Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output System No power is applied to the recorder Remote control wont functionMains power cord is discon- nected If you’re using the RF OUT connec- tion Roubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers EN EN Index Rear View Remote Control VCR, TV Prog +/-,TV +/-, TV Muting Maximum recording time Rotary two-head herical scanIN/OUT x 1, IN/DECODER x Auto Set Up referring to the display panel Ex. Francais is selected for Belgium