Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC HR-J268EU, HR-J311EU, HR-J468EU specifications Features

1 52

Download 52 pages, 1.02 Mb

18 EN

RECORDING (cont.)

Recording

Features

Record One Programme

While Watching Another

If your recorder is connected to the TV via AV connection, . . .

. . . press TV/VCR. The recorder's VCR indicator and the TV

broadcast being recorded disappear.

SELECT CHANNEL TO

WATCH

1

Once recording is in progress, all you need to do is to

set the channel controls on the TV for the station you

wish to view.

●The programme selected with the TV’s channel

controls appears on the TV screen while the one

selected with the recorder's TV PROG buttons is

recorded on the tape.

●If a decoder is connected to the recorder (Z pg. 34),

you can select a scrambled channel as well with the

TV channel controls.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1

Press DISPLAY or – –:– – until a counter reading

appears on the display panel.

RESET COUNTER

2

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact

elapsed time as the tape runs.

123

456

789

0

2

4

1

3

?

STANDBY/ON

TIMER

REC LINK

TV PROG

DISPLAY

Tape Remaining Time

DISPLAY REMAINING TIME

1

Press DISPLAY or – –:– – until the time remaining on

the tape appears.

●The display panel shows the tape remaining time

with " " displayed.

●By pressing the – –:– – button, you can change the

display to show the counter reading, channel

position*, clock time or tape remaining time.

* channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when

the tape remaining time reading may not appear right away, or

is not correct. "– –:– –" may sometimes appear, or the display

may blink on occasion.

TV PROG

– –:– –

0000

TV PROG

TV/VCR

DISPLAY

STANDBY/ON

TIMER

REC LINK

TV PROG

DISPLAY

TV PROG

DISPLAY

[J468/268EU]

[J311EU]

Contents

Main VIDEO CASSETTE RECORDER INSTRUCTIONS HR-J468EU HR-J311EU HR-J268EU FIRST EN SEE AUTO SET-UP ON BACK CONTENTS Safety Precautions CAUTION WARNING For Italy: Connections SITUATE RECORDER CONNECT RECORDER TO TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set/Auto Video Channel Set TURN ON THE RECORDER SELECT COUNTRY pg. 42 43), then go to step 4. If you have selected any other country name (code), go to step 4. CONFIRM/SET VIDEO CHANNEL FINISH AUTO SET UP SELECT LANGUAGE If you are referring to the on-screen display PERFORM AUTO SET UP Preset Download PERFORM PRESET DOWNLOAD SET VIDEO CHANNEL Auto clock may not function properly depending on the reception condition. When you perform T-V LINK function, be sure to use fully- wired 21-pin SCART cable. INFORMATION Language ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE On-Screen Displays ENABLE/DISABLE ON-SCREEN DISPLAY The superimposed indication on the TV screen tells you what the recorder is doing. q6 Power Save Mode SELECT POWER SAVE The Just Clock function ( During Power Save, the display panel will be turned off. pg. 42) does not work while the Power Save mode is engaged. T-V Link Functions ACCESS MODE SET SELECT DIRECT REC MODE If "DIRECT REC" is set to "OFF", the RECORD button functions as described in "Basic Recording" ( NexTView Link Colour System Set INFORMATION ON COLOUR SYSTEM SELECT COLOUR SYSTEM About NTSC Playback The counter and tape remaining time readings will be incorrect. Playback Usable cassettes LOAD A CASSETTE FIND PROGRAMME START POINT STOP PLAYBACK Playback Features Instant ReView Before starting, make sure that the recorder is off and that the Timer mode is disengaged. To return to normal playback during a Skip Search, press PLAY. pg. 28). ACTIVATE INSTANT REVIEW Instant ReView is not possible while the recorder is in the Timer mode. Index Search Before starting, make sure the recorder is in the Stop mode. ACTIVATE INDEX SEARCH ACTIVATE REPEAT PLAYBACK "AUTO SP Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. STOP PLAYBACK PLAYBACK (cont.) LOAD A CASSETTE Accidental erasure prevention CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Features Record One Programme While Watching Another If your recorder is connected to the TV via AV connection, . . . SELECT CHANNEL TO WATCH Elapsed Recording Time Indication ENGAGE ITR MODE SET RECORDING DURATION You can only perform ITR using the RECORD button on the recorder's front panel. B.E.S.T. Picture System Preparation RECORDING (cont.) SELECT B.E.S.T. MODE Recording Playback ACCESS SHOWVIEW SCREEN ENTER SHOWVIEW NUMBER ACCESS SHOWVIEW PROGRAM SCREEN S Timer Programming TIMER RECORDING SHOWVIEW SHOWVIEW 12345678 SET TAPE SPEED (HR-J468EU ONLY) Timer Warning Express Timer Programming ACCESS SHOWVIEW ACCESS PROGRAMME ENTER PROGRAMME START TIME ENTER PROGRAMME STOP TIME ENTER CHANNEL POSITION SET VPS/PDC MODE Z ENGAGE RECORDERS TIMER MODE Satellite Tuner Users Check, Cancel And Replace Programmes DISENGAGE TIMER MODE ACCESS PROGRAM CHECK SCREEN/DISPLAY ACCESS PROGRAM SCREEN/ DISPLAY To cancel or replace a programme... Auto Timer ACCESS MAIN MENU SCREEN ACCESS MODE SET SCREEN SELECT MODE RETURN TO NORMAL SCREEN Automatic Satellite Programme SELECT AV2 SELECT MODE ENGAGE AUTO SATELLITE PROG REC MODE Edit From A Camcorder EDITING MAKE CONNECTIONS SET RECORDERS INPUT SET EDIT MODE Edit To Or From Another Video Recorder EDITING (cont.) MAKE CONNECTIONS When Using Your Video Recorder As The Source Player . . . When Using Your Video Recorder As The Recording Deck . . . AV2 SELECT Setting 1 2 3 4 5 Connection To A Satellite Tuner If you don't have a decoder SYSTEM CONNECTIONS If you have a decoder . . . SELECT INPUT MODE SYSTEM CONNECTIONS (cont.) CONNECT DECODER SET TUNER Connecting/ Using A Decoder SHOWVIEW Setup SUBSIDIARY SETTINGS When timer-programming with S When you wish to timer-record a satellite programme with S . Tuner Set ACCESS AUTO CH SET SELECT COUNTRY SELECT LANGUAGE Auto Channel Set PERFORM AUTO CHANNEL SET VIEW CONFIRMATION Storing Channels Manually SELECT BAND INPUT CHANNEL ENTER NEW CHANNEL INFORMATION ACCESS CONFIRMATION SELECT POSITION Change Station Channel Position SELECT ITEM SELECT NEW POSITION SELECT ITEM DELETE CHANNEL SELECT STATION NAME CHARACTER ENTER NEW CHARACTER * Set Stations (B) SELECT ITEM TV Station And ID List TURN THE RECORDER ON ACCESS INITIAL SET ACCESS CLOCK SET pg. 4, 8), you cannot use Just Clock function. Skip steps 6 and 7 on page 43. Clock Set SET JUST CLOCK SET CLOCK DATA SOURCE CHANNEL POSITION START CLOCK OPERATION Video Channel Set ACCESS VIDEO CHANNEL SET MODE SET RF OUTPUT SYSTEM SET VIDEO CHANNEL With AV Connection TROUBLESHOOTING POWER TAPE TRANSPORT RECORDING PLAYBACK TROUBLESHOOTING (cont.) TIMER RECORDING OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING INDEX FRONT VIEW [J468/268EU] FRONT VIEW [J311EU] 0 %9 $# REAR VIEW DISPLAY PANEL 09 !@ REVIEW SP VCR INDEX (cont.) REMOTE CONTROL Z ) q SPECIFICATIONS Auto Set Up pg. 44) as required. pg. 36), clock setting ( BEFORE YOU START PLEASE MAKE SURE THAT: EN * HR-J468/311/268EU