JVC HR-J268EU, HR-J468EU, HR-J311EU specifications Timer Warning, Satellite Tuner Users, Press SP/LP

VPS/PDC

STOP+/–

PROG 1

1

4

7

2	DAILY
	3
		2
5	6
8	9	WEEKLY
0		4

?

	SP/LP
3	OK

					EN	23
4		SET TAPE SPEED (HR-J468EU ONLY)
	Press SP/LP (			) to set the tape speed.
5		SET VPS/PDC MODE
	Press VPS/PDC to select "ON" or "OFF".
	If "VPS/PDC		ON" is displayed on the screen or "VPS/
		PDC" is lit on the display panel, VPS/PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
		is not lit on the display panel, VPS/PDC is set to OFF.
	☞ "VPS/PDC Recording" on page 25.
6		RETURN TO NORMAL SCREEN
	Press PROG or OK. "PROGRAM COMPLETED" appears
		on the screen for about 5 seconds, then normal screen
		appears.
		● Repeat steps 1 – 6 for each additional programme.
7		ENGAGE RECORDER’S TIMER MODE
	Press ä (TIMER). The recorder turns off automatically
		and ä appears on the display panel.
		● To disengage the timer, press ä (TIMER) again.

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

1Set "AV2 SELECT" to "AV2" (☞ pg. 31).

2 Perform steps 1 – 7.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

● You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).

● It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with "0".

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

● Press the NUMBER keys or %Þ to input the channel

position number on which your recorder receives that

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

station, then press OK or #to set the Guide Program

number. The SHOWVIEW program screen appears.

NOTES:

● The warning only appears if

you’re not in the Timer mode at that time.

GUIDE PROG SET

GUIDE PROG	TV PROG
2	– –
[5°] =
[PROG] : EXIT

(Ex.) To timer-record a ZDF programme with SHOWVIEW.

*If your recorder receives ZDF on the channel position 2, press OK or # after entering "2".

● If this recorder is being used as the player for tape

dubbing, the warning screen is recorded on the tape in

the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .