JVC HR-J311EU, HR-J268EU specifications AV2 Select Setting, Recorder, HR-J468EU HR-J311/268EU

EN31

TV Receiver		Player	Your recorder			Recorder	Your recorder		TV Receiver
					ENTREE			ENTREE
					ANT. IN			ANT. IN
			AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE	ENTREE/DECODEUR	ENTREE/SORTIE	ANTENNE
			IN/DECODER	IN/OUT	SORTIE	AV2 IN/DECODER	AV1 IN/OUT	SORTIE
					RF OUT			RF OUT
		21-pin SCART Cable
VIDEO		(not provided)				21-pin SCART Cable			RF Cable
										VIDEO
CHAN-	RF Cable					(not provided)			(provided)
NEL or										CHANNEL
AV mode	(provided)									or AV
										mode
			Another recorder			Another recorder
		Recorder				Player

AV2 SELECT Setting

1Press MENU to access the Main Menu screen.

2 Press %Þ to move the highlight bar (pointer) to "MODE SET",		HR-J468EU		HR-J311/268EU
then press OK or #.		MODE SET		MODE SET
3 Press %Þ to move the highlight bar (pointer) to "AV2 SELECT".		PREVIOUS PAGE		B. E. S. T.	ON
4 Press OK or #to select "AV2", "DECODER" or "SAT".		AV2 SELECT	AV2
		COLOUR SYSTEM PAL/NTSC		PICTURE CONTROL	AUTO
a–AV2	: To use this recorder as the recording deck with			AUTO TIMER	OFF
	the player connected to the AV2 IN/DECODER			O. S. D.	ON
	connector, or to use the satellite tuner con-			DIRECT REC	ON
				POWER SAVE	ON
	nected to the AV2 IN/DECODER connector.			AV2 SELECT	AV2
				NEXT PAGE
b–DECODER : To use a decoder connected to the
		[5°] =		[5°] =
	AV2 IN/DECODER connector.	[MENU] : EXIT		[MENU] : EXIT
c–SAT	: To view a satellite programme with the TV set
	while the recorder is in Timer mode, in Stop
	mode, recording or turned off. (☞ pg. 32)

5Press MENU to return to normal screen.

●If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to "DECODER" after editing.

●If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".

●The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT" back to "DECODER".