Recording

Features

COUNTER RESET

 

 

q

TV PROG.

RECORD

 

DISPLAY

2

1 2 3

4

5

6

7 8 9

19

Record One Programme While Watching Another

SELECT PRESET TO WATCH

1 Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you wish to view.

The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1 Press DISPLAY until a counter reading appears on the dispay panel.

RESET COUNTER

2 Press C. (COUNTER) RESET before starting recording or playback.

The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.

C.RESET

04

TV PROG.

3

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and 0:30 appears on the front display panel.

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY until the time remaining on the tape appears.

By pressing the DISPLAY button, you can change the display to show the counter reading, preset position, clock time* or tape remaining time.

*Preset position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.

SET RECORDING

DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

Page 19
Image 19
JVC HR-J249EK, HR-J745EK instruction manual Recording Features