TimeScan, Speed SP Speed LP, Audio output | JVC HR-J935EK guide

19

TimeScan

Names of special-effects playback

Speed SP

Speed LP

Recorder's Time Scan shuttle indicator

Audio output

Reverse

Forward

Search

Play

Slow-Motion

*Still

Slow-Motion

Play

Search

-9x

-7x

-5x

-3x

-1x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

3x

5x

7x

9x

-7x

-3x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

5x

9x

Orange

Green

Red

Green

Orange

Audio is output.

Audio is not

Audio is

Audio is not

Audio is output.

output.

output.

output.

*Still mode cannot be engaged using the remote control's PUSH JOG button. In the Still mode, the TIME SCAN indicator does not light even though you can hear TimeScan audio.

●The recorder's TimeScan indicator lights during TimeScan.

●The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be distorted.)

●To resume normal playback, press PLAY.

●When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned too fast.

●Picture may be distorted at the position where the recording speed is switched.

●The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with LP recordings.)

●Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP recordings, or depending on the tape being used.

●Picture may appear distorted in comparison to normal playback.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

●TimeScan does not work with NTSC playback.

If you don't want to hear TimeScan audio, set the TIME SCAN AUDIO swtich on the recorder to OFF.

Image 19

JVC HR-J935EK specifications TimeScan, Speed SP Speed LP, Audio output

Contents

HR-J935EK Safety First Safety PrecautionsDo not place the recorder Step Quick SET UP Situate Recorder Check ContentsInstalling Your N EW Recorder Basic Connections Tune The TV To Your Video Recorder Select Output ModeSET TV Preset Reset Output Mode Unit Connection To Satellite ReceiverInst Allin G Your NEW RE C Order contd Satellite Receiver Make Connections Connection To Stereo SystemAudio OUT View Confirmation Screen Access CH SET Mode MenuTuner Set Turn on the Recorder Preparation Clock SetTurn the Recorder on SET Clock Automatically SET Just Clock PresetInitial Settings SET Date and Time Playback Basic Playback FeaturesActivate HIGH-SPEED Search Activate Instant Review Adjust Tracking ManuallyOverride Automatic Tracking Return to Automatic Tracking Next Function Memory Tape Position IndicatorActivate Index Search Index Search Activate Counter Activate Scene FinderStop Scene Finder SET Counter Memory Track USE Ntsc PlaybackSoundtrack Selection During Playback Display Remaining Time SET A/B Code SwitchRE-SUPPLY Power Remote A/B Code Switching Variable-Speed Search/ Reverse Play Audio signal during TimeScanTime Scan Shuttle Indicator Time Scan Indicator TimeScan Speed SP Speed LP TimeScanAudio output Recording Confirm B.E.S.T. Status Access Mode SelectS.T. Picture System Recording Recording ON-SCREEN Display ENABLE/DISABLEClose Mode Select On-Screen Displays Receiving Nicam Stereo And Bilingual Programmes Recording FeaturesSelect Preset to Watch Record One Programme While Watching Another SET Counter Display Reset CounterEngage ITR Mode Adjust Audio Recording Level Guide Channel Set Access CH. SET Mode Menu ScreenTimer Recording Information On Video Plus+ Number Enter Preset PositionClose Menu When Using The Illumi-Guide Feature Video Plus+ Timer RecordingTimer RECORDINGcont Access Timer PROGRAM- Ming Screen Satellite Receiver Users Timer ModeReturn to Normal Engage RECORDER’S Press Prog Regular Timer ProgrammingAccess Programme Screen Will come on automatically Press TV PROG. + Engage RECORDER’S Timer ModeTime TV Prog + +/-, Date +/- and TV PROG. +/- buttons on Check And Cancel ProgrammesTimer Warning Revise Programme IN- Formation PDC Recording TimerAuto SP/LP Timer Engage Auto SP/LP Start Recording Deck SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source Player Start Recorder SET RECORDER’S Input ModeEdit From a Camcorder Start Camcorder Locate EDIT-IN Point Access R.A. Edit FunctionRandom As- semble Editing Prepare for Editing Prepare Recording Deck Locate EDIT-OUT PointStart R.A. Edit END R.A. Edit Reset the Counter SET Input ModeLocate Start Point Start Editing Engage Insert EditingEND Insert Editing END Audio Dubbing Audio DubbingEngage Audio Dubbing Start Dubbing Make sure to select the correct input mode in step TRY Operating TV Control Your TV Using Addi- tional ButtonsMulti-Brand Remote Con- trol SET TV Brand Code Select Position Access CH. SET ModeSelect Mode Menu Select NEW Position Change Station Preset PositionSelect Item Delete Channel Enter NEW Character Switch StationsSelect NEW Station Select Station Name Character Select Channel to Perform TuningFine-Tuning Channels Already Stored Access Manual CH. SET Station Name TV Station and ID List TV STA T ION Channel Number G Uide Back TroubleshootingPanel Indicator off If you are using the AV connection R Oubleshooting Timer againCamcorder recording is not Camcorder has not been Questions and Answer S Ä remain lit on the display panel. Is there a problem? Maximum recording time Specifications Index Multi-Brand Remote MBR Control SettingList Of Terms Front View Open the lid to access covered connectors and buttons Time Scan Audio Switch enables/disables TimeScan Audio. pg Rear View Display Panel Remote Control How To Use Installing Batteries HR-J935EK