JVC HR-S4500U manual Insert Editing, Locate END Point, Locate Start Point

54EN

EDITING(cont.)

Insert Editing

Recorder Your VCR

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you with to change the normal audio track as well, use the audio dubbing function simultaneously. Use your VCR as the recorder.

OG

Source tape

PAUSE

Audio/Video cable (supplied)

Audio/Video signal

Another VCR

Player

1	2	3
UMBER		2
	5	6
4
"0"	8	9
7
C.RESET	0	4

1

TIME SCAN SHUTTLE

Recorded tape			Before insert editing	Normal
				audio track
			After insert editing
				Video/Hi-Fi
				audio track
		MAKE CONNECTIONS
		Connect the player's VIDEO OUT and AUDIO OUT
		connectors to your VCR's VIDEO IN and AUDIO IN
1 connectors.
		SET RECORDER’S INPUT MODE
		Set to "AUX". Press the NUMBER key “0” and/or CH to
		select depending on the connector being used – "L-1"
2 for the rear AUDIO/VIDEO IN connector, or "F-1" for
		the front AUDIO/VIDEO IN connector.
		LOCATE END POINT
		Load the recording cassette into your VCR, and play it
		back to determine the edit-out point (the end of the
3 segment to be replaced) using the JOG/TIME SCAN
		SHUTTLE controls or TIME SCAN 4¢ and PAUSE.
4		RESET THE COUNTER
		Press C.RESET to change the counter display to
	"0:00:00".
5		LOCATE START POINT
		Determine the edit-in point (the beginning of the
		segment to be replaced) using the JOG/TIME SCAN
		SHUTTLE controls or TIME SCAN 4¢ and PAUSE.

●Be sure to engage the Still mode at the edit-in point.

PAUSE

3

TIME SCAN