JVC HR-S4500U manual Engage Insert Editing, Start Editing, END Insert Editing

1	2	3
4	5	6
7	8	9
C.RESET	0
		PLAY
1
		3

		EN 55
PLAY	6	ENGAGE INSERT EDITING
		Press INSERT.
		● Your VCR enters the Insert-Pause mode. (" ", " "
		and " " light up on the front display panel.)
		● The TV screen changes from the still picture to the
		input source you are going to record.
	A.DUB	START EDITING
		Load the source cassette and play back the segment that
		is to be inserted. When you reach the start of the
INSERT	7 section of the source tape that you wish to insert, press
		at this point.
		PLAY to start the tape in your VCR; Insert Editing begins

●" " and " " are displayed on the front display panel.

END INSERT EDITING

8 At counter "0:00:00", Insert Editing will stop automati- cally and both tapes will continue running in the Play mode. If you wish to stop Insert Editing before the specified edit-out point, press C.RESET.

2

FOR AV INSERT EDITING

If you want to replace the picture, Hi-Fi audio soundtrack and normal audio soundtrack all at the same time...

4In step 6 above, after you press INSERT, press A.DUB also.

("" and "" blink and " " lights up on the display panel.)

NOTES:

●Insert editing is not possible with cassettes whose safety tab has been removed.

●In insert editing, the recording speed (SP/EP) is determined by the previous recording to be replaced. If the previous recording's speed changes within a single edit, the inserted picture will be distorted at the switching point.

●As small portion of the recording which precedes an insert edit may become erased.