JVC HR-S4500U manual Edit From a Camcorder, Editing

52EN

EDITING(cont.)

You can use a camcorder as the player and yourVCR as the recorder.

Edit From A Camcorder

Recorder Your VCR

To rear panel	S-VIDEO
REMOTE PAUSE/AV	IN
COMPULINK
connector

VIDEO	AUDIO	S-VIDEO
		cable
IN	IN	(supplied)
		Mini-plug cable
		(not supplied)
		(JVC camcorder
Audio/Video		only)
		AUDIO
cable
		OUT
(supplied)
		EDIT
		S-VIDEO
		OUT
	VIDEO OUT
		Camcorder
		Player
	MENU	OK

CH

NUMBER "0" 0 4

1

3 OK

MENU

TIME SCAN

1

2

3

4

5

6

MAKE CONNECTIONS

Connect an AV cable between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.

●If connecting a camcorder with an S-VIDEO output connector, it is recommended to use the S-VIDEO connection to minimize picture degradation while editing.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

●If connecting to a camcorder with a monaural output, connect the audio output connector on the camcorder to AUDIO IN L of the VCR.

LOAD A CASSETTE

Insert the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

Set to "AUX". Press the NUMBER key “0” and/or CH to select depending on the connector being used – "L-1" for the rear AUDIO/VIDEO IN connector, or "F-1" for the front AUDIO/VIDEO IN connector.

If you have connected a JVC Master Edit Control- equipped camcorder to...

... the VCR's rear panel S-VIDEO IN and AUDIO IN connectors — step 4

... the VCR's rear panel VIDEO IN and AUDIO IN connectors — step 4

... the VCR's front panel VIDEO IN and AUDIO IN connectors — step 8

If you are not using a JVC Master Edit Control-equipped camcorder — step 12

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS FUNCTION SET SCREEN

Press CH 5° or TIME SCAN %Þ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or

TIME SCAN #.

SELECT REAR AUX INPUT SET MODE

a– S-VHS IN: Move the highlight bar (arrow) to "REAR AUX INPUT" by pressing CH 5° or TIME SCAN %Þ, then press OK or TIME SCAN #to set to "S-VIDEO".

b– REAR VIDEO: Move the highlight bar (arrow) to "REAR AUX INPUT" by pressing CH 5° or TIME SCAN %Þ, then press OK or TIME SCAN #to set to "VIDEO".

FUNCTION		PREVIOUS PAGE
=AUTO TIMER	OFF	S-VHS MODE	AUTO
SUPERIMPOSE	ON	AV COMPU-LINK	ON
AUTO SP=EP TIMER	OFF	VIDEO CALIBRATION	ON
VIDEO STABILIZER	OFF	TIMESCAN AUDIO	ON
2ND AUDIO RECORD	OFF	=REAR AUX INPUT	S-VIDEO
AUDIO MONITOR	HI-FI	TAPE DUB MODE	ON
NEXT PAGE
SELECT WITH (5,°) AND (OK)		SELECT WITH (5,°) AND (OK)
PRESS (MENU) TO END		PRESS (MENU) TO END