56
EN
Audio Dubbing
PAUSE | PLAY |
EDITING
(cont.)
Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Use your VCR as the recorder.
Normal audio track
A.DUB
Audio cable
Audio component
(CD player etc.)
NOTES:
● When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the
● Audio dubbing stops automatically when the counter reaches "0:00:00", and the VCR enters the Play mode. Check the counter reading before dubbing.
● Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
● When playing back an
● Picture may be distorted during Audio Dubbing Pause. ● It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
1
2
3
4
5
6
MAKE CONNECTIONS
Connect an audio component to your VCR's AUDIO IN L+ R connectors. *When connecting monaural equipment, use only the VCR's AUDIO IN L connector.
SET RECORDER’S INPUT MODE
Set to "AUX". Press the NUMBER key “0” and/or CH to select depending on the connector being used –
LOCATE START POINT
Press PLAY to start playback of the tape in your VCR, and press PAUSE when you find the point where you want to start dubbing.
ENGAGE AUDIO DUBBING
Press A.DUB.
●Your VCR enters the Audio Dubbing Pause mode. (" 
" blinks, " 
" and " 
" light up on the front display panel.)
START DUBBING
Engage the audio component's Play mode, then press PLAY to start the tape in your VCR. Audio dubbing begins at this point.
●" 
" blinks and " 
" is displayed on the front display panel.
●To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.
END AUDIO DUBBING
Press STOP to stop the tape in your VCR, and engage the audio component's Stop mode.
