JVC HR-S5600AM specifications Basic Recording

RECORDING

EN17

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

COLOUR SYSTEM PLAY

TV PROG SP/LP/EP RECORD STOP/EJECT

TV signals being received by the recorder's built-in tuner can be recorded onto a video tape. You can "capture" a TV programme using your video recorder.

S-VHS recording is possible only for PAL recordings made in the SP or LP mode, or NTSC recordings made in the SP mode. S-VHS ET recording is possible only for PAL recordings made in the SP mode, or NTSC recordings made in the SP mode.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
	● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.
	● Select the appropriate colour system by pressing the
		COLOUR SYSTEM button (☞ pg. 40).
		CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 channel you wish to record.
	SET TAPE SPEED
	Press SP/LP/EP ( ). Check the SP/LP/EP indicator on
	the recorder display panel to confirm the selected tape
3 speed.
	START RECORDING
	Press and hold RECORD and PLAY on the remote

1 2 3

4 5 6

7 8 9

0

2

4

NUMBER

4	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of each first
	SP and first LP (or EP) recording after inserting the
	cassette (☞ pg. 22).
	PAUSE/RESUME

TV PROG

LAY	SP/LP/EP
1

PAUSE

RECORD

3

STOP

RECORDING

5 Press PAUSE. Press PLAY to resume recording.

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

6 cassette.

NOTE:

When recording in NTSC, if EP is selected, recording will always be done in the VHS mode even if an S-VHS cassette is used.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Recording Resume

Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.