JVC HR-S5600AM specifications Start Dubbing, END Audio Dubbing

PLAY

PAUSE

EN39

START DUBBING

5 Engage the audio component's Play mode, then press PLAY to start the tape in your recorder. Audio dubbing begins at this point.

● "" blinks and "" is displayed on the front display panel.

●To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.

END AUDIO DUBBING

6 Press STOP to stop the tape in your recorder, and engage the audio component's Stop mode.

NOTES:

1 2 3

4 5 6

7 8 9

0

AUDIO

2

4

● When monitoring the sound during Audio Dubbing, the normal

soundtrack is automatically selected. If you wish to hear the

mixed sound (Hi-Fi + Normal soundtracks), press AUDIO on

the remote control to select " NORM (HI FI + NORM)"

(☞ pg. 16).

● Audio dubbing stops automatically when the counter reaches

"0:00:00", and the recorder enters the Play mode. Check the

counter reading before dubbing.

● Audio dubbing is also possible using the rear panel AUDIO

IN L + R connectors. When using these connectors, make

sure to select the correct input mode in step 2.

● Audio dubbing cannot be performed on a cassette that has

had its record safety tab removed.

● When playing back an audio-dubbed tape, press AUDIO on

the remote control to select the soundtrack you wish to hear

1

PLAY

(☞ pg. 16).

STOP

PAUSE

3