16 EN | INITIAL SETTINGS (cont.) |
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
2
346
2
3
Access Main Menu screen on VCR
Press MENU.
Access Initial Set screen
On the front panel:
Press CH5° to move the highlight bar (arrow) to “INITIAL SET”, then press OK.
SP EP |
|
VCR |
|
4 |
1 | 2 | 3 |
| 7 |
|
|
| 2 | |
4 | 5 | 6 |
| 5 |
7 | 8 | 9 |
| |
|
| |||
| 0 |
| 4 |
|
1
2
3467 
3– 5
Setting cable box output channel & brand
After installation, set the cable box output’s channel and its brand correctly; otherwise, the Controller cannot work correctly.
1 Turn on cable box
Select a channel other than channel 9 on your cable box.
On the Remote:
Press SHUTTLE PLUS %Þ to move the highlight bar (arrow) to “INITIAL SET”, then press OK or
SHUTTLE PLUS #.
Access Cable Box Set screen
On the front panel: Press CH5° to move the highlight bar (arrow) to “CABLE BOX SET”, then press OK.
On the Remote:
Press SHUTTLE PLUS
%Þ to move the highlight bar (arrow) to “CABLE BOX SET”, then press OK or SHUTTLE PLUS #.
Select cable box output channel
Your selection depends on how your cable box is connected to your VCR.
If your cable box is connected to your VCR’s ANT. IN terminal on the rear
Press CH 5° on the front panel or SHUTTLE PLUS %Þ on the Remote until the channel number representing the cable box’s output (CH2
– CH9) appears on the screen.
If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel
Press CH 5° on the front panel or SHUTTLE PLUS %Þ on the Remote until “ON
If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the rear panel
Press CH 5° on the front panel or SHUTTLE PLUS %Þ on the Remote until “ON
If you do not use a cable box
Press CH 5° on the front panel or SHUTTLE PLUS %Þ on the Remote until “OFF” appears on the screen.
