EN 13
Tuner Setting
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
14
23
SP EP
VCR
23
1 2 3
2
4 5 6
7 8 9
0 4
1
14
23 
23
Setting channels
automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting or if you use a cable box. If you want to add or delete channels, use Manual Channel Set ( pg. 14).
1Access Main Menu screen
Press MENU.
2Access Tuner Set screen
On the front panel: | MAIN MENU | |
Press CH5° to move | FUNCTION SET | |
the highlight bar (arrow) | =TUNER SET |
|
to “TUNER SET”, then | INITIAL SET |
|
|
| |
press OK. |
|
|
On the Remote:
Press SHUTTLE PLUS
%Þ to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS #.
3 Perform Auto Channel Set
You can automatically
set the receivable
channels in your area in 
CATV the order of their
frequencies.
On the front panel: Press CH5° to move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK.
On the Remote: Press SHUTTLE PLUS %Þ to move the
highlight bar (arrow) to
“AUTO CHANNEL
SET”, then press OK or SHUTTLE PLUS #.
NOTES:
When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.
If the scan was unsuccessful, “SCAN COMPLETED– NO SIGNAL” appears on screen. Check the connections and start again.
4Return to normal screen
Press MENU.
INFORMATION
The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.
The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.
