![](/images/new-backgrounds/1280796/28079659x1.webp)
30 EN | TIMER RECORDING |
VCR Plus+
Timer
Programing
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
POWER
Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method ( pg. 34) as far as a year in advance.
The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)
1 Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.
The VCR turns on, and the counter is reset, automatically.
DAILY
CANCEL
STOP +/–
27
1 2
4 | 5 |
7 | 8 |
0 |
1
3 |
|
|
| 2 | 34 |
6 |
| |
|
| |
9 |
| WEEKLY |
|
| 8 |
|
| 4 |
|
| 6 |
2 Access VCR Plus+ screen Press PROG. on the Remote.
The clock must be set to access the VCR Plus+ screen.
If you have not set the clock, the Main Menu
screen appears after an error message is displayed. Refer to page 8 for the Plug & Play setting or page 10 for the clock setting procedure.
347
Enter PlusCode number |
|
|
|
|
| |
3 Press the appropriate |
| VCR PLUS+ | ||||
Number keys to input |
| |||||
the PlusCode number |
|
|
|
|
| |
| 123 |
|
|
| ||
printed in the TV |
|
|
|
| ||
|
|
|
|
| ||
listings for the TV |
|
|
|
|
| |
broadcast you wish to |
|
|
|
|
|
|
| PRESS NUMBER KEY | |||||
record, then press OK. |
|
|
|
| THEN (OK) | |
|
| PRESS (PROG.) TO END |
Then;
If the Guide Channel Set screen appears
— go to step 4.
If the VCR Plus+ Program screen appears
— go to step 5.
To make corrections, press CANCEL and input the correct PlusCode number.