Filename [XV48EX_EN_07S-VHS.fm]
Masterpage:Left+
24 EN
Page 24 October 9, 2004 10:34 pm
OPERATIONS ON VHS DECK (cont.)
SHOWVIEWTM Timer
Programming
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
ASelect the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
BAccess the SHOWVIEW screen.
CEnter the SHOWVIEW number.
DAccess the SHOWVIEW Program screen.
●If the number you entered is invalid, “ERROR” appears on the
TV screen. Press & and input a valid SHOWVIEW number.
ESet the tape speed.
Press p.
FSet the VPS/PDC mode.
Press VPS/PDC (number key “7”) to select “ON” or
“OFF.”
●If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is
set to “ON.”
●If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”
is set to “OFF.”
墌“VPS/PDC Recording” on page 25.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the unit’s built-in clock is set properly.
●Insert a cassette with the safety ta b in place. The unit will
come on automatically.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote contro l to the
right.
Press PROG.
Slide to the
right.
SHOWVIEW SYSTEM
Press the number keys to
enter the SHOWVIEW number
of a programme you wish to
record.
●If you make a mistake, press &
and input the correct number.
Press ENTER, then the
SHOWVIEW Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or “TV PROG” shows “– –,” press PR+/– to
input the channel position number on which your unit
receives the station, then press ENTER or e.
SHOWVIEW SYSTEM
XV48EX_EN_01.book Page 24 Saturday, October 9, 2004 10:34 PM