Filename [XV48EX_EN_09Editing.fm]

XV48EX_EN_01.book Page 48 Saturday, October 9, 2004 10:34 PMMasterpage:Left0

48 EN

 

REMOTE CONTROL

Remote Control Functions

On the remote control

 

Keep pressing VCR down during steps A – B.

 

 

A

 

 

Remote A/B/C/D Code Switching

Change the remote control code.

Press the number key “1” for A, “2” for B, “3” for C, or

 

The remote control is capable of controlling four JVC video units

“4” for D.

independently. Each of the units can respond to one of four

 

 

 

codes (A, B, C or D). The remote control is preset to send A code

B Set the remote control code.

signals because your unit is initially set to respond to A code

signals. You can easily modify your unit to respond to B, C or D

Press ENTER to set the code.

code signals.

 

On the unit

Before performing the following steps:

Slide the TV/VCR/DVD switch on the remote control to the

 

 

 

C Turn off the unit.

right.

 

 

Slide to the right.

Press 1.

D Display the code.

Press 4 on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.

If the code displayed on the front display panel is different from the code set on the remote control, go to step E.

E Change the unit’s code.

Press 8 on the remote control. The code currently set on the remote control will be applied to the unit.

NOTE:

When “POWER SAVE” is set to “ON” ( pg. 54), it is impossible to change the remote code.

Page 48

October 9, 2004 10:34 pm

Page 48
Image 48
JVC HR-XV48E manual 48 EN