JVC HR-XV48E manual 12 EN, Perform Preset Download, Set the video channel

Filename [XV48EX_EN_06Index.fm]
XV48EX_EN_01.book Page 12 Saturday, October 9, 2004 10:34 PM	Masterpage:Left+

12 EN		INITIAL SETTINGS (cont.)
Preset Download	A
		Perform Preset Download.

Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set

If you have connected the unit to your TV via the AV connection ( pg. 9), the unit will automatically perform Preset Download instead of the Auto Set Up in step D on page 11. After downloading, the unit sets the clock and Guide Program numbers automatically.

ATTENTION

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

●Slide the TV/VCR/DVD switch on the remote control to the right.

●Perform steps A to C of “Auto Set Up” on page 10 before continuing.

Slide to the right.

Press ENTER. The AUTO SET/T-V LINK display appears on the TV screen.

Press rt to move the highlight bar (pointer) to “T-V LINK” and press ENTER or e.

●When selecting “T-V LINK,”

“CH – –” also appears on the front display panel.

Preset positions on the front display panel increase from “1”; do NOT press any button on the unit or remote control until the front display panel shows clock time, “1” or “– –:– –” as illustrated on page 13.

●The T-V LINK screen will appear. Then the GUIDE

PROG SET screen will appear during Guide Program Number Set. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

●If you press any button on the unit or remote control while downloading is in progress, it will be interrupted.

NOTES:

●For details, refer to the instruction manual of your TV.

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this unit, the characters available for station names (ID) are

A–Z, 0–9, –, f, + and I (space). Some names of downloaded stations may differ from those of your TV. ( pg. 62)

B Set the video channel.

Set the video channel to off manually. ( pg. 64)

After “Preset Download” is completed, perform “Monitor Set (DVD deck)” on page 14.

Page 12

October 9, 2004 10:33 pm