JVC HR-XVC25U manual Control four JVC VCRs, Power Play

3 To turn off the unit, press POWER on the front panel.

4 Press PLAY on the front panel for 5 seconds. The current setting code of the unit appears on the display.

Press one of the following buttons to enter the desired code, then press ENTER.

Control four JVC VCRs

The remote control is capable of controlling four JVC VCRs independently; one set to respond to your remote control’s A code control signals and the other set to respond to B, C, D code control signals. The remote control is preset to send A code signals because your DVD/VCR is initially set to respond to A code signals. You can easily modify your DVD/ VCR to respond to the other code signals.

Preparation:

Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

1 Press and hold VCR on the remote control until you finish the step 2.

2

1:sets the remote control code to “A”

2:sets the remote control code to “b”

3:sets the remote control code to “C”

4:sets the remote control code to “d”

5 Press STOP on the remote control. The new code is transmit- ted to the unit and blinks for about 4 seconds on the display, then the clock time appears.

6 Press POWER on the remote control. When the unit is turned on, the setting is complete. If the unit is NOT turned on, repeat from step 1.

POWER

PLAY

13