Timer recording
Timer recording can be programmed
Preparation:
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode.
•Load a cassette tape with the erase prevention tab intact.
•Press OSD to verify time and date are correct (see page 31).
Example: Program a timer recording for the 26th day, channel 125
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).
1 | Press SET UP MENU. Select the |
| TIMER REC SET |
|
| |
|
| MENU |
|
| ||
| TIMER REC SET option, then press |
| AUTO REPEAT | ON | OFF | |
|
| |||||
|
| |||||
| ENTER. |
|
| SAP | ON | OFF |
|
|
| ||||
|
|
| CH SETUP |
|
| |
|
|
|
|
| ||
SYSTEM SETUP
·+/–/ENTER/MENUÒ
2
3
Press SET + or
Press SET + or
DATE | START | END | CH |
|
– | ||||
– | ||||
– | ||||
– | ||||
– | ||||
– | ||||
– | ||||
– | ||||
| ||||
DATE | START | END | CH |
|
26(SU) | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
– – – – – – | – – – | – | ||
NOTES:
• If the clock symbol ( ) blinks when |
4 Set the start time, end time, channel
and tape speed as in step 3.
NOTES:
• If the programmed start time is over the present time, the program will be canceled after pressed ENTER.
DATE START END CH
the timer recording ended, the TV |
program has not been completely |
recorded because of an insufficient |
tape supply. In this case, press TIMER |
to cancel the timer program or press |
EJECT to remove the cassette tape. |
• During timer recording standby mode, |
the VCR mode cannot be selected. To |
use the VCR, press TIMER at first, |
then press VCR to change to VCR |
mode. After you use the VCR, press |
TIMER again to put the VCR into timer |
recording standby mode. |
• If you press TIMER during timer |
recording, the recording operation will |
be interrupted. If you press TIMER |
again within the programmed time, the |
recording operation will start again. |
• After a power failure or disconnection |
of the power plug, all programmed |
recording settings and time display |
will be lost upon resumption of power. |
In this case, reset the clock (see pages |
recordings. |
•Press CANCEL to move cursor backward for correction.
•To record from external source set the channel to “L”. “L” will appear next to CH 125 (or 69).
5 | To enter other programs, repeat step | 26(SU) | 11:00PM 11:30PM125 EP | |||
| DATE | START | END | CH |
| |
| 2 through 4. | – – – – – – | – – – | – | ||
|
| – – – – – – | – – – | – | ||
|
| – – – – – – | – – – | – | ||
| •To return to the normal screen, | – – – – – – | – – – | – | ||
| – – – – – – | – – – | – | |||
| press SET UP MENU twice. | – – – – – – | – – – | – | ||
| – – – – – – | – – – | – | |||
6 Press TIMER. The clock symbol (
) will appear on the display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off.
The timer recording will start at 5 seconds before the time you predetermined.
NOTES:
•If the clock symbol ( 
) does not appear on the display in spite of the pressing of TIMER, the cassette may not have been loaded yet (see page 26).
•If the cassette is ejected in spite of the pressing of TIMER , the erase prevention tab of the cassette may have been removed (see page 26).
33
