JVC HR-XVC25U manual Duplicating a video tape, Duplicating a disc material onto a video tape

Duplicating a video tape/Duplicating a disc material onto a video tape

Duplicating a video tape

If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

1

2

3

Load a blank cassette tape with the erase preven- tion tab intact into the recording VCR.

Load a previously recorded tape into the playback VCR or CAMCORDER.

Press SP/EP to select the desired tape speed SP or EP.

It is recommended that you set the speed to the SP mode on the recording VCR for best results.

Press VCR CH + or –to select AUDIO/VIDEO input position. “L” will appear in the

display.

4 Press REC on the recording VCR or on the Remote. While holding REC, press PLAY.

Then press PAUSE.

5 Press PLAY button on the playback VCR or CAMCORDER, then press PAUSE button.

6 Press PAUSE on both the VCRs simultaneously to begin the duplicating process.

Connection with second VCR

Playback VCR

To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT

AUDIO/VIDEO cable (supplied)

Recording VCR

Connection with Camcorder

Playback Camcorder

To AV Jack

Recording VCR

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN

AUDIO/VIDEO cable (not supplied)

To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

Duplicating a disc material onto a video tape

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.

If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “ ” will appear on the screen for approx. 4 seconds. See page 39 for more information about the DVD playback.

Preparation:

•Load a cassette tape with the erase prevention tab intact.

•Select the tape speed (SP or EP) in the VCR mode.

•Load a disc you wish to duplicate.

1 Press DVD to select the DVD mode. (The DVD indicator will light.)

2 Press PLAY to start the disc playback.

36

3 During disc playback, press REC on the VCR or while holding REC, press PLAY on the Remote. The duplicating will start.

NOTES:

•You can set the duplicating time using the ITR-function. At step 3 above press REC repeatedly until the desired duplicating time appears on the screen (see page 32).

•When the scanning mode is set to the progressive mode, you cannot duplicate a disc material onto a video tape. When REC is pressed, the PROGRESSIVE

indicator “ ” on the display window will flash and

“Please Set Off” will appear on the screen.