20

Setting the video channel/Setting the language

To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
NOTES:
• If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
•If no buttons are pressed for more than
60 seconds,the MENU screen will
return to normal TV operation
automatically.
•Both the VCR and the DVD have their
own menu options (See page 38).
2Press POWER to turn on the DVD/VCR.
3Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to
select the VCR mode. The VCR indicator on the front panel
will light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
4Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 1.
5Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display window.
6Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.

Setting the Video Channel

Setting the language

3
Press SET UP MENU.
The VCR menu screen will appear.
Press or to select “SYSTEM
SETUP”, then press ENTER.
If you use the unit for the first time
and press SET UP MENU, instead
of the main menu screen on the
right the “SYSTEM SETUP” menu
screen in step 2 may appear.
Press or to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2Press or to select the
“LANGUAGE” option, then press
ENTER.
4Press SET UP MENU until the MENU screen is cleared.
Press and hold 3 or 4 on the remote for 3 seconds in standby
mode. The video channel will start to flash
for 3 seconds in the display window.
1