JVC HR-XVC25U manual Basic connections, Ohm Coaxial Cable supplied Splitter

Basic connections

DVD/VCR TO TV CONNECTION

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.

Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.

This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.

75 ohm Coaxial Cable (supplied)

Splitter

75 ohm Input 75/300 ohm outputs

75 ohm Coaxial Cable (not supplied) (supplied)

Splitter

75 ohm Input

300 ohm outputs

75 ohm Coaxial Cable (not supplied) (supplied)

TV

VHF/UHF IN

TV

UHF

VHF

TV

UHF

VHF

NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode.

TV with single 75 ohm VHF/UHF antenna input

NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode.

TV with 300 ohm UHFand 75 ohm VHF antenna inputs

NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode.

TV with 300 ohm UHF and 300 ohm VHF antenna inputs

15