To ensure proper use of this product, please read this
owner’s manual carefully and retain for future refer-
ence.
This manual provides information on the operation
and maintenance of your DVD+VCR. Should the unit
require service, contact an authorized service loca-
tion.
Never operate the DVD+VCR immediately after mov-
ing it from a cold location to a warm location. Leave it
for two or three hours without operating it. If you use
the DVD+VCR in such a situation, it may damage
disc/tapes and internal parts.

Symbol Used in this Manual

Note: Indicates special notes and operating
features.
Tip: Indicates tips and hints for making the task
easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the sym-
bol.
ALL All discs listed below
DVD DVD and finalized DVD±R/RW
VCD Video CDs
ACD Audio CDs

About the Symbol Display

“ ” may appear on your TV display during operation
and indicates that the function is not permitted by this
unit or the disc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.

About the Remote Control

Operation Range
Point the remote control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle: About 30° in each direction of the front of the
remote sensor.
Battery installation
Detach the battery cover on the rear of the
remote control, and insert two (R03/AAA)
size batteries with F and G aligned cor-
rectly.
Do not mix old and new batteries and never
mix different types of batteries such as stan-
dard, alkaline, etc.
Introduction

Moisture Condensation

5
Introduction