D.S.C. PLAYBACK | EN 29 |
Normal Playback Of Images
Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album.
Lock Button
Power Switch
Rewind Button (3)
Stop Button (8)
Playback Mode Switch
INFO ButtonMENU Wheel
Play/Pause Button (4·9)
1Load a memory card. ( pg. 19)
2Set the Playback Mode Switch to “MEMORY”.
3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
4Open the LCD monitor fully, or pull out the viewfinder fully.
●The still image which has been played back at the last time is displayed.
5Press 3 to display the previous file. Press 5 to display the next file.
●Pressing INFO gives you details on the displayed file. ( pg. 30)
●You can also look for the desired file using Index Screen. ( pg. 30)
●You can turn off the
NOTES:
●Even if you shoot a new image after playing back a
●Images shot in a file size other than “640 x 480”, “848 x 480”, “1280 x 720” and “1280 x 960” with another devices will be displayed thumbnail images. These thumbnail images cannot be transferred to a PC.
●Images shot with devices (such as JVC GR- DVM70) that are not compatible with DCF cannot be viewed with this camcorder; “UNSUPPORTED FILE!” will be displayed.
Playback Zoom
Available only with the remote control (provided). ( pg. 59)
Auto Playback Of Images
You can run through all the images stored in memory card automatically.
1Perform steps 1 – 4 in “Normal Playback Of Images”.
2Press 4·9 to start Auto Playback. Files are displayed in descending order.
●If you press 3 during Auto Playback, files are displayed in ascending order.
3To end Auto Playback, press 8.
[For Normal Playback] [For Auto Playback] To display the next imageImage playback screen (IMAGE)