4 Open the LCD monitor fully, or pull out the viewfinder fully.
● The still image which has been played back at the last time is displayed.
5 Press the MENU Wheel in. The Menu Screen appears.
6 Rotate the MENU Wheel to select “DELETE”, and press it. The Sub Menu appears.
Set the Playback Mode Switch to “MEMORY”.
Load a memory card. ( pg. 19)
1
2
3 Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
32 EN
To remove protection from all files stored in the memory card
7 Rotate the MENU Wheel to select “CANC.ALL”, and press it. The PROTECT screen appears.
8 Rotate the MENU Wheel to select “EXECUTE”, and press it.
● To cancel selection, select “RETURN”.
Deleting Files
Previously stored files can be deleted either one at a time or all at once.
Lock Button Power Switch
Rewind Button (3)
Playback Mode Switch
MENU Wheel Fast-Forward Button (5)

D.S.C. PLAYBACK (cont.)

To delete the currently displayed file

7Rotate the MENU Wheel to select “CURRENT”, and press it. The DELETE screen appears.

8Press 3 or 5 to select the desired file.

MENU

DELETE CURRENT ALL

RETURN

9Rotate the MENU Wheel to select “EXECUTE”, and press it.

To cancel deletion, select “RETURN”.

Repeat steps 8 and 9 for all files you want to delete.

NOTE:

DELETE

DELETE?

EXECUTE RETURN

If the “” mark appears, the selected file is protected and cannot be deleted.

To delete all files stored in the memory card

7Rotate the MENU Wheel to select “ALL”, and press it. The DELETE screen appears.

8Rotate the MENU Wheel to select “EXECUTE”, and press it.

● To cancel deletion, select “RETURN”.

NOTES:

Protected files ( pg. 31) cannot be deleted. To delete them, remove protection first.

Once files are deleted, they cannot be restored. Check files before deleting.

CAUTION:

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it. ( pg. 34)