SYSTEM CONNECTIONS | EN 67 |
Connection To A Personal Computer[A] Using USB cable
| To USB connector |
| USB cable (provided) |
|
| PC |
| To USB |
|
OR |
|
| [B] Using i.LINK cable |
|
i.LINK cable | To i.LINK |
(optional) | connector |
| PC with i.LINK |
To i.LINK IN/OUT | connector |
[A] Using USB cable
It is possible to do the following things:
●Transfer still images stored on a memory card to a PC.
●Use this camcorder as a WebCam. ( pg. 68)
[B] Using i.LINK cable
It is also possible to transfer still/moving images to a PC with an i.LINK connector by using the provided software, software equipped with the PC or commercially available software.
NOTES:
●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.
●The software operation manual is provided as PDF file on the
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 13)
●Never connect the USB cable and the i.LINK cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●When using an i.LINK cable, be sure to use the optional JVC
●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with an i.LINK
●The system may not work properly depending on the PC or capture board you are using.
“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.