EN 55

Dubbing To Or From A Video Unit

To use this camcorder as a player

1 Make sure all units are turned off.

Equipped With An i.LINK

2 Connect this camcorder to a video unit equipped

Connector (Digital Dubbing)

with an i.LINK input connector using an i.LINK

cable as shown in the illustration.

Using an i.LINK cable (optional), it is possible to dub

3 Set this camcorder’s Playback Mode Switch to

“VIDEO”.

recorded scenes in DV format from the camcorder

4 Set this camcorder’s Power Switch to “P”

onto another video unit equipped with i.LINK

connector. Since a digital signal is sent, there is little

while pressing down the Lock Button located on

if any image or sound deterioration.

the switch.

Scenes recorded in SD or HD mode can be dubbed

5 Set “i.LINK OUT” to “SW”. ( pg. 35, 39)

only to a D-VHS VCR with HS mode or another

● If, in future, the connected video unit

same model of this unit.

 

automatically detects the DV and MPEG2

 

 

formats, set “i.LINK OUT” to “AUTO”. In this

 

 

case, proceed to step 7.

 

 

6 Set the i.LINK Output Select Switch on this

 

 

camcorder to “DV” to output scenes recorded in

 

 

DV mode, or “MPEG2” to output scenes

 

 

recorded in HD or SD mode.

i.LINK Output Select

 

7 Turn on the video unit’s power.

Connector Cover*

8 Insert the source cassette in this camcorder.

Switch

 

 

9 Insert the recording cassette in the video unit.

 

To i.LINK IN/OUT

10 Press 4·9on this camcorder to start playback

 

 

of the source cassette.

 

 

11 At the point you want to start dubbing, engage

 

 

the video unit’s Record mode.

 

i.LINK cable

12 To pause dubbing, engage the video unit’s

 

(optional)

Record-Pause mode and press 4·9 on this

 

 

camcorder.

 

 

13 Repeat steps 10 – 12 for additional editing.

 

 

Stop the video unit and camcorder.

To i.LINK IN/OUT

 

NOTES:

 

 

● If a blank portion or disturbed image is played

 

 

back on the player during dubbing, unusual

 

 

images may be dubbed or the dubbing may stop.

 

 

● If a scene which has been paused during

 

 

recording is dubbed to other devices, playback

 

 

may stop at the point.

Video unit equipped with

● If “Wipe Or Fader Effects” ( pg. 50), “Special

Effects” ( pg. 51), “Playback Zoom (DV only)”

i.LINK connector

( pg. 59) or “TIME CODE” ( pg. 39) is set,

 

 

* When connecting the cable, open the cover.

only the original playback image is output from

the i.LINK IN/OUT connector.

NOTES:

 

 

 

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 13)

●When using an i.LINK cable, be sure to use the optional JVC VC-VDV204U i.LINK cable.

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

CONTINUED ON NEXT PAGE