72 EN

 

TROUBLESHOOTING (cont.)

 

Advanced features

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

 

15.

The focus does not adjust

15.

•Focus is set to the Manual

15.

•Set Focus to the Auto mode.

 

 

automatically.

 

mode.

 

( pg. 46)

 

 

 

 

•The recording was done in a

 

•Clean the lens and check the

 

 

 

 

dark place, or the contrast

 

focus again. ( pg. 81)

 

 

 

 

was low.

 

 

 

 

 

 

•The lens is dirty or covered

 

 

 

 

 

 

with condensation.

 

 

 

 

 

 

 

 

 

 

16.

In the 5-Second mode,

16.

•The 5-Second mode is set to

16.

•Set “5S” to “5S” in MANUAL

 

 

recording ends before

 

“Anim.” in MANUAL Menu.

 

Menu. ( pg. 35, 37)

 

 

5 seconds have elapsed.

 

 

 

 

 

 

 

 

 

 

 

 

17.

Snapshot mode cannot be

17.

•The Squeeze mode (16:9SQ)

17.

•Disengage the Squeeze

 

 

used.

 

is selected.

 

(16:9SQ) mode.

 

 

 

 

 

 

( pg. 35, 38)

 

 

 

 

 

 

 

 

18.

The color of Snapshot looks

18.

•The light source or the

18.

•Find a white subject and

 

 

strange.

 

subject does not include

 

compose your shot so that it

 

 

 

 

white. Or there are various

 

also appears in the frame.

 

 

 

 

different light sources behind

 

( pg. 28, 44)

 

 

 

 

the subject.

 

•Disengage the Sepia (SEPIA)

 

 

 

 

•The Sepia (SEPIA) or

 

and Monotone

 

 

 

 

Monotone (MONOTONE)

 

(MONOTONE). ( pg. 35,

 

 

 

 

mode is activated.

 

51)

 

 

 

 

 

 

 

 

19.

The image taken using

19.

•Shooting was performed

19.

•Press BACK LIGHT.

 

 

Snapshot is too dark.

 

under backlit conditions.

 

( pg. 45)

 

 

 

 

 

 

 

 

20.

The image taken using

20.

•The subject is too bright.

20.

•Press P.AE and set

 

 

Snapshot is too bright.

 

 

 

“PROGRAM AE” to

 

 

 

 

 

 

“SPOTLIGHT”. ( pg. 50)

 

 

 

 

 

 

 

 

21.

White Balance cannot be

21.

•The Sepia (SEPIA) or

21.

•Disengage the Sepia (SEPIA)

 

 

activated.

 

Monotone (MONOTONE)

 

or Monotone (MONOTONE)

 

 

 

 

mode is activated.

 

mode before setting White

 

 

 

 

 

 

Balance. ( pg. 51)

 

 

 

 

 

 

 

 

22.

Wipe/Fader effects do not

22.

•The Power Switch is set to

22.

•Set the Power Switch to “M”.

 

 

work.

 

“A”.

 

( pg. 16)

 

 

 

 

 

 

 

 

23.

The Black & White Fader does

23.

•The Sepia (SEPIA) or

23.

•Disengage the Sepia (SEPIA)

 

 

not work.

 

Monotone (MONOTONE)

 

and Monotone

 

 

 

 

mode is activated.

 

(MONOTONE).

 

 

 

 

 

 

( pg. 35, 51)

 

 

 

 

 

 

 

 

24.

Program AE does not work.

24.

•The Power Switch is set to

24.

•Set the Power Switch to “M”.

 

 

 

 

“A”.

 

( pg. 16)

 

 

 

 

 

 

 

 

25.

Cannot record signals from a

25.

•The connected device is not

25.

•Dubbing from other devices

 

 

device which is connected to

 

compatible with this

 

in MPEG2 format is possible

 

 

the i.LINK IN/OUT connector.

 

camcorder.

 

if the connected device is

 

 

 

 

 

 

another same model of this

 

 

 

 

 

 

unit. It is also possible to dub

 

 

 

 

 

 

in MPEG2 format from a D-

 

 

 

 

 

 

VHS VCR, if the source tape

 

 

 

 

 

 

(D-VHS) has been originally

 

 

 

 

 

 

dubbed from this digital HD

 

 

 

 

 

 

video camera in MPEG2

 

 

 

 

 

 

format.