EN 57

Dubbing Still Images Recorded On

1

Load a cassette. ( pg. 18)

2

Load a memory card. ( pg. 19)

A Tape To A Memory Card

3

Set the Playback Mode Switch to “VIDEO”.

Still images can be dubbed from a tape to a memory

4

Set the Power Switch to “P” while pressing

 

down the Lock Button located on the switch.

card.

5 Set “

COPY” to “ON”. ( pg. 35, 41)

 

Lock Button

6

Press 4·9 to start playback.

Power Switch

7

At the point you want to dub, press 4·9again to

 

 

8

engage Still Playback.

SNAPSHOT Button

To dub the image, press SNAPSHOT.

 

 

● The “

” indication appears during

Playback Mode Switch

 

dubbing.

 

 

 

● The selected image is stored in the memory

 

 

card.

 

 

NOTES:

 

 

● If SNAPSHOT is pressed in step 8 when a memory

 

card is not loaded, the message “COPYING

 

FAILED” is displayed.

 

● If an image recorded on the tape using “DV

MENU Wheel

WIDE” ( pg. 38) is dubbed to a memory card,

the WIDE mode identifying signal is not dubbed

Play/Pause Button (4·9)

with it.

 

● To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). ( pg. 60)

● Images are dubbed in the following image sizes: Scenes recorded in HD mode: 1280 x 720 pixels Scenes recorded in SD mode: 848 x 480 pixels Scenes recorded in DV mode: 640 x 480 pixels