PLAYBACK MENUS

 

EN 41

 

 

 

Video Menu

Synchro adjustment

 

 

 

 

 

 

 

 

 

For details, refer to “For More Accurate Editing”

 

 

 

 

VIDEO

( pg. 66).

 

 

 

 

 

SYNCHRO

(Factory-preset: ±0.0)

 

 

 

 

Playback sound

Recording mode

 

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 35, select “SOUND MODE” or “DV NARR.” from the Menu Screen and set it to the desired parameter.

SOUND MODE (Factory-preset: STEREO )

STEREO : Sound is output on both “L” and “R” channels in stereo.

SOUND L : Sound from the “L” channel is output.

SOUND R : Sound from the “R” channel is output.

DV NARR.

(Factory-preset: OFF)

OFF: Original sound is output on both “L” and “R” channels in stereo.

ON: Dubbed sound is output on both “L” and “R” channels in stereo.

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 54, 56)

REC MODE

(Factory-preset: SP)

SP / LP

 

NOTE:

“REC MODE” can be set when the Power Switch is set to “P” or “M”.

Dubbing from tape to memory card

COPY

(Factory-preset: OFF)

OFF: When the SNAPSHOT button is pressed during tape playback, the playback image pauses and normal playback will resume after approximately 6 seconds. (The still image is not recorded.)

ON: Enables dubbing of images recorded on a tape to a memory card. ( pg. 57)

Deleting thumbnail images

For details, refer to “To delete thumbnail images” ( pg. 53).

NAVI.DEL.IMAGE SEL. / TAPE SEL. / ALL / RETURN

S-Video/AV input

S/AV INPUT

(Factory-preset: OFF)

OFF: Enables audio/video signal output to a TV, VCR, etc. via the S/AV connector. ( pg. 26, 56)

A/V IN: Enables audio and video signal input from the S/AV connector. ( pg. 54)

S IN: Enables audio and S-video signal input from the S/AV connector.