EN 75

Warning Indications
Indications

 

 

Meaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displays the battery remaining power.

 

 

 

 

 

Remaining power level: high

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining power level: exhausted

 

 

 

 

 

 

 

 

 

 

 

 

As the battery power comes close to nil, the battery indicator blinks.

 

 

 

 

 

When the battery power is exhausted, power turns off automatically.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears when no tape is loaded.

( pg. 18)

 

 

 

 

 

 

 

 

 

 

 

 

CHECK TAPE’S ERASE

Appears when the erase protection tab is set to “SAVE” while the Power Switch is

PROTECTION TAB

set to “A” or “M” and the Recording Mode Switch is set to any mode except

“MEMORY”.

( pg. 16)

 

 

 

 

 

 

 

 

 

 

 

HEAD CLEANING

Appears if dirt is detected on the heads during recording. Use an optional

cleaning cassette.

 

 

REQUIRED USE

 

 

 

 

 

 

CLEANING CASSETTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONDENSATION

Appears if condensation occurs. When this indication is displayed, wait more

than 1 hour until condensation disappears.

 

 

OPERATION PAUSED

 

 

 

 

 

 

PLEASE WAIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button or

SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and

 

 

 

the Recording Mode Switch is set to any mode except “MEMORY”.

 

 

 

 

 

 

 

 

 

 

 

TAPE END

Appears when the tape ends during recording or playback.

( pg. 69)

 

 

 

 

 

 

 

 

 

SET DATE/TIME!

● Appears when the date/time is not set.

( pg. 17)

● Appears when the built-in clock (lithium) battery is discharged and the

 

 

 

previously set date/time is erased.

( pg. 17)

 

 

 

 

 

 

 

 

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

 

 

 

 

 

 

 

 

CAN NOT PLAY BACK

Appears when you attempt to play back a tape that is not compatible with this

THIS TAPE

camcorder.

 

 

 

 

 

 

 

 

 

 

CAN NOT CHANGE

Appears when you attempt to change the recording mode during recording.

RECORDING MODE

 

 

 

 

( pg. 21)

RECORDING IS

 

 

 

 

 

 

STOPPED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INVALID DATA!

Appears when you attempt to record signals which are copygurded or not

CAN NOT RECORD

compatible with this camcorder.

 

 

COPY PROTECTED

 

 

 

 

 

 

CAN NOT RECORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE