JVC KD-G800 manual Locating a track or a particular portion on a CD, To stop play and eject the CD

ENGLISH

To stop play and eject the CD

Press 0.

CD play stops and the control panel moves down. The CD automatically ejects from the loading slot.

•If you change the source or turn the power off, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been stopped previously.

To return the control panel to its previous

position, press 0 again.

•If you keep the loading slot fully open for

1 minute, (beeps sound when the “BEEP SWITCH” is set to “BEEP ON”—see page 29) the control panel automatically returns to its previous position.

Be careful not to get the disc or your finger caught in between the control panel and the unit.

Notes:

•If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

(Disc play will not start this time.)

•You can eject the disc even when the unit is turned off.

To go to the next or previous tracks

Press ¢ briefly, while playing a CD, to go ahead to

the beginning of the next track.

Each time you press the button consecutively, the beginning of the next tracks is located and played back.

Press 4 briefly, while playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.

To go to a particular track directly

Press the number button corresponding to the track number to start its playback.

•To select a track number from 1 – 6: Press 1 (7) – 6 (12) briefly.

•To select a track number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than one second.

Locating a track or a particular portion on a CD

To fast-forward or reverse the track

Press and hold ¢, while playing a CD, to fast-forward the track.

Press and hold 4 , while playing a CD, to reverse the track.

To go to a track quickly (+10 and –10 buttons)

1Press MODE to enter the functions mode while playing a CD.

2Press +10 or –10.

To skip 10 tracks* forwards to the last track

To skip 10 tracks* backwards to the first track

*First time you press +10 or –10 button, the track skips to the nearest higher or lower

track with a track number of multiple ten (ex. 10th, 20th, 30th).

Then each time you press the button, you can skip 10 tracks (see “How to use the +10 and –10 buttons” on page 15).

•After the last track, the first track will be selected, and vice versa.

14