JVC KD-AR800, KD-G700, KD-G800 manual To turn the tag display on or off —TAGDISPLAY, English, Notes

ENGLISH

To select the external component to use —EXTERNAL IN (only for KD-AR800/KD-G800)

You can connect the external component to the CD changer jack on the rear using an adapter specially designed for the external component. When shipped from the factory, CD changer is selected as the external component.

• CHANGER: To use the CD changer.

•	LINE IN:	To use the external component
		other than CD changer (only for
		KD-G800).
•	SIRIUS:	To use the JVC SIRIUS Radio.

Notes:

•Only for KD-G800: For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/Connection Manual (separate volume).

•For connecting the JVC SIRIUS Radio, refer to the SIRIUS Radio Setup Manual (separate volume).

To turn the tag display on or off

—TAG DISPLAY

An MP3/WMA file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version

1)and ID3v2 (ID3 Tag version 2). If both ID3v1 and ID3v2 are recorded on a disc, ID3v2 information will be shown.

When shipped from the factory, “TAG DISP ON” is selected.

•TAG DISP ON: Turns on the ID3 tag display while playing MP3/WMA files.

•If an MP3/WMA file does not have ID3 tags, folder name and file name appear.

Note:

Only for KD-AR800/KD-G800: If you change the setting from “TAG DISP OFF” to “TAG DISP ON” while playing an MP3/WMA file, the tag display will be activated when the next file starts playing.

•TAG DISP OFF: Turns off the ID3 tag display while playing MP3/WMA files. (Only the folder name and file name can be shown.)

To select the amplifier gain control —AMP.GAIN

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “LOW POWER” to prevent them from being damaged. When shipped from the factory, “HIGH POWER” is selected.

•LOW POWER: You can adjust the volume level from “VOL 00” to “VOL 30.”

Note:

If you change the setting from “HIGH POWER” to “LOW POWER” while listening at a volume level more than 30, the unit automatically changes the volume level to “VOL 30.”

•HIGH POWER: You can adjust the volume level from “VOL 00” to “VOL 50.”

• OFF:	Only for KD-AR800:
	Deactivates the built-in
	amplifier. (Sounds come out
	only from external amplifiers
	connected to Line Out plugs).

To turn the slot light on or off

—SLOT LIGHT

You can turn off the slot light if you do not want the illumination each time you insert/eject the disc or when you change the control panel angle. When shipped from the factory, slot illumination is activated.

•ON: Activates the illumination.

•OFF: Deactivates the illumination.

30