To turn the key-touch tone on or off
You can deactivate the
•BEEP ON: Activates the
•BEEP OFF: Deactivates the
To adjust the display contrast level
Adjust the display contrast (01 – 10) to make the display indications clear and legible.
When shipped from the factory, the display contrast level is set at level 05.
To select the scroll mode—SCROLL MODE
You can select the scroll mode for the disc information (when the entire text cannot be shown at a time).
When shipped from the factory, scroll mode is set to “SCROLL ONCE.”
•SCROLL ONCE: Scrolls only once.
•SCROLL AUTO: Repeats the scroll
•SCROLL OFF: Cancels scroll mode.
Note:
Even if the scroll mode is set to “SCROLL OFF,” you can scroll the display by pressing DISP (display) for more than 1 second.
To select the subwoofer cutoff frequency
When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer.
When shipped from the factory, the subwoofer cutoff frequency is set to “FREQ MID.”
•FREQ LOW: Frequencies higher than 50 Hz are cut off to the subwoofer.
•FREQ MID: Frequencies higher than 80 Hz are cut off to the subwoofer.
•FREQ HIGH: Frequencies higher than 120 Hz are cut off to the subwoofer.
To adjust the line input level
Adjust the line input level properly when an external component is connected to the LINE IN plugs.
When shipped from the factory, the line input level is set at level 00.
If the input level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from the external component to another source.
ENGLISH
29