JVC KD-AR800 External Component Operations, Playing an external component, 3Adjust the volume

EXTERNAL COMPONENT OPERATIONS

ENGLISH

This section is only for KD-AR800/KD-G800.

Playing an external component

For KD-AR800:

You can connect an external components to the LINE IN plugs on the rear.

•You can also connect the SIRIUS tuner to the CD changer jack on the rear and select it as the external component.

For KD-G800:

You can connect the external component to the CD changer jack on the rear using the adapter specially designed for the external component.

•Before operating the external component, select the “EXTERNAL IN” setting correctly (see page 30).

•To use the JVC SIRIUS Radio, refer to the SIRIUS Radio Setup Manual (separate volume).

1Select the external component (LINE IN/SIRIUS).

For KD-AR800:

Press CD/CD-CH LINE repeatedly.

CD	CD-CH
	(or SIRIUS)

To select LINE IN, press and hold

CD/CD-CH LINE.

For KD-G800:

Press CD/CD-CH repeatedly.

CD CD-CH

(or LINE IN/

SIRIUS)

Note on One-Touch Operation:

When you press CD/CD-CH LINE (for KD-AR800) or CD/CD-CH (for KD-G800), the power automatically comes on. You do not have

to press to turn on the power.

2Turn on the connected component and start playing the source.

3Adjust the volume.

4Adjust the sound as you want. (See pages 23 – 25.)

39