Using the remote controller — RM-RK60
ENGLISH
This receiver can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller
•When operating, aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between.
Installing the lithium coin battery (CR2025)
Warning:
•Store the battery in a place where children cannot reach to avoid risk of accident.
•To prevent the battery from
–Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire.
–Do not leave the battery with other metallic materials.
–Do not poke the battery with tweezers or similar tools.
–Wrap the battery with tape and insulate when throwing away or saving it.
Caution on remote sensor:
Remote sensor
•DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
Main elements and features
1 (standby/on attenuator) button
•Turns on and off the power and also attenuates the sound.
2SRC (source) button
• Selects the source.
3R (reverse) / F (forward) buttons
•Searches for stations or DAB services if pressed briefly.
•Searches for ensembles if pressed and held.
•
•Changes the tracks of the disc.
4SOUND button
•Selects the sound mode
5U (up) / D (down) buttons
•U (up): Changes the FM/AM/DAB bands.
•D (down): Changes the preset stations or DAB services.
•Changes the folder of the MP3/WMA
discs.
6VOLUME +/– buttons
• Adjusts the volume level.
The receiver is equipped with the steering wheel remote control function.
•See the Installation/Connection Manual (separate volume) for connection.
26