Sound adjustments

Adjusting the sound

You can adjust the sound characteristics to your preference.

•When appears on the display, you can move back to the previous display by pressing number button 3.

1

2

•For “EQ” setting, see the following.

3Adjust the selected setting item.A Fad/Bal (Fader/Balance)

1 Press number button 1 () to move to the “Fad/Bal” adjustment display.

2Adjust the speaker output balance by pressing:

5/ ∞: between the front and rear speakers. [F06 to R06]

4/¢ :

between the left and right speakers. [L06 to R06]

BSubwoofer

1 Press number button 1 () to move to the “Subwoofer” adjustment display.

2Use4/¢to select a cutoff frequency to the subwoofer.

• 80Hz: Frequencies higher than

 

80 Hz are cut off.

 

• 120Hz: Frequencies higher than

ENGLISH

120 Hz are cut off.

 

• 160Hz: Frequencies higher than

 

160 Hz are cut off.

 

3 Turn the control dial to adjust the

 

subwoofer output level. [0 to 8]

 

CVolAdjust

Turn the control dial to adjust the input level of each source (except FM).

[–5 to +5]

Adjust to match the input level of the FM sound level.

•Before making an adjustment, select a source you want to adjust.

DLoudness

Turn the control dial to activate or deactivate the loudness to produce a well-balanced sound at low volume levels. [Off or On]

4Exit from the setting.

Selecting preset sound modes (i-EQ: intelligent equalizer)

You can select a preset sound mode suitable to the music genre.

Available sound modes

FLAT (No sound mode is applied), H.ROCK (Hard rock), R & B (Rhythm & blues),

POP, JAZZ, DANCE, COUNTRY, REGGAE, CLASSIC, USER 1, USER 2, USER 3

• When appears on the display, you can move back to the previous display by pressing number button 3.

Continued on next page...

17