2-2Setting the clock

1Press number button 4 (). “Clock Hr” (hour) appears. Then, turn the control dial to adjust the hour.

2Press ¢ to select “Clock Min” (minute). Then, turn the control dial to adjust the minute.

3Press ¢ to select “24H/12H.” Then, turn the control dial to select “24Hours” or “12Hours,” time display mode.

3Exit from the setting.

To check the current clock time when the power is turned off

*2

“LARGE” (full display size) graphic*1 is displayed.

Audio level meter is displayed (see “LevelMeter” on page 20).

Goes back to the initial display pattern.

*1 You can use your edited file for graphic screen (see pages 23 – 26).

Depending on a downloaded file, it may take a longer time to show it on the display.

*2 The information bar will disappear if no operation is performed for five seconds.

ENGLISH

Changing the display pattern

Ex.: When tuner is selected as the source

Source operation display

“SMALL” (CD jacket image) graphic*1 is displayed.

Radio operations

~

Ÿ

!Start searching for a station.

When a station is received, searching stops.

When receiving an FM stereo broadcast with sufficient signal strength, lights up on the display.

To stop searching, press the same button again.

Continued on next page...

7