Setting the display color

1Follow steps 1 to 3 on page 19.

In step 2, select “COLOR.”

In step 3, select “Color Sel.”

2

3Select a source.
6Exit from the setting. Creating your own color—User Color

You can create your own colors—“Day Color” or “NightColor.”

1Follow steps 1 to 3 on page 19.

In step 2, select “COLOR.”

In step 3, select “Color Set.”

2Select “Day Color” or “NightColor.”

ENGLISH

All Source*1 OCD OChanger (or Ext In*2) OUSB*3 OFM OAM ODAB*3 OIpod*3/D.PLAYER*3 O(back to the beginning)

*1 When you select “All Source,” you can use the same color for all the sources.

*2 Depends on the “Ext Input” setting, see page 22.

*3 Displayed only when the target component is connected.

4Select a color.

Every*4 OAqua OSky OSea OLeaves OGrass OApple ORose OAmber OHoney OViolet OGrape OPale O User*5 O(back to the beginning)

*4 The color changes every 2 seconds.

*5 The user-edited colors—“Day Color” and

“NightColor” will be applied (see right column for details).

5Repeat steps 3 and 4 to select the color for each source (except when selecting “All Source” in step 3).

3Select a primary color.4Adjust the level (+00 to +11) of the selected primary color.5Repeat steps 3 and 4 to adjust other primary colors.

6Exit from the setting.

27