JVC KD-G821 Announcement types, 3Selecting an announcement type, ENGLISH 4 Exit from the setting, •While receiving a DAB service:, •While receiving an FM RDS station:

3Selecting an announcement type.ENGLISH 4 Exit from the setting.

either lights up or flashes on the playback display.

• If lights up, Announcement Standby Reception is activated.

• If flashes, Announcement Standby Reception is not yet activated.

To activate, tune in to another service

providing the related signals. will stop flashing and remain lit.

Tracing the same programme— Alternative Frequency Reception

You can keep listening to the same programme by activating the Alternative Frequency Reception.

•While receiving a DAB service:

When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.

•While receiving an FM RDS station:

When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service.

When shipped from the factory, Alternative Frequency Reception is activated.

To deactivate the Alternative Frequency Reception, see page 22.

To deactivate the Announcement Standby Reception

Select “Announce Off” in step 2 on page 33. goes off.

Announcement types

Travel, Warning, News, Weather, Event,

Special, Rad Inf (Radio Information), Sports,

Finance

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite programme type from any source other than AM.

•Operations are exactly the same as explained on page 11 for FM RDS stations.

•PTY Standby Reception for DAB tuner works only using a dynamic PTY code.

•You can activate and deactivate PTY Standby Reception when the source is either “FM” or “DAB.”

To show the Dynamic Label Segment (DLS) information

While listening to an ensemble that supports

DLS....

Lights up when receiving a service providing Dynamic Label Segment (DLS)—DAB radio text.

•The DLS display will be temporarily canceled when you operate the unit.

To show whole text at once, press and hold DISP while DLS is displayed. Multi-line text display appears.

•When the text contains more than 64 characters, another window appears to show the rest of the text.

To restore the previous display, press and hold DISP again.

34