JVC KD-SHX900 manual To select the dimmer mode-Dimmer, To adjust the display brightness Bright

Models: KD-SHX900

1 58
Download 58 pages 20.34 Kb
Page 37
Image 37

To select the dimmer mode—Dimmer

When you turn on the car headlights, the display and button illumination automatically dims (Auto Dimmer).

Auto: Activates Auto Dimmer.

Off: Cancels Auto Dimmer.

On: Always activates Dimmer.

To adjust the display brightness

—Bright

You can adjust the brightness to make the display clear and legible.

To turn the tag display on or off

—ID3 Tag

An MP3 and WMA track can contain track information called “Tag” where its album name, performer, track title, etc. are recorded.

On: Shows the Tag display while playing MP3 or WMA tracks.

Off: Cancels the Tag display. Only the folder name and track name appear.

For MP3 tracks only: There are two versions– ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). When both ID3v1 and ID3v2 are recorded, ID3v2 will be shown.

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To select the external component to use

—EXT Input

To use the external component connected to the CD changer jack as the playback source through this unit, you need to select which component to use.

Changer: To use a JVC CD changer.

Sirius: To use a JVC SIRIUS Radio.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

On: Activates the key-touch tone.

Off: Deactivates the key-touch tone.

To select the amplifier gain control— Amp Gain

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “Low Power” to prevent them from being damaged.

HighPower: You can adjust the volume level from “0” to “50.”

Low Power:You can adjust the volume level from “0” to “30.”

Off: Deactivates the built-in amplifier. (Sounds come out only from external amplifiers connected to LINE OUT/ SUBWOOFER OUT plugs.)

ENGLISH

37

Page 37
Image 37
JVC KD-SHX900 manual To select the dimmer mode-Dimmer, To adjust the display brightness Bright