JVC KS-FX725R Removing the head / tape guide See, Removing the flywheel assembly F & R See

Removing the head / tape guide

(See Fig.18 and 19)

REFERENCE:It is not necessary to remove the slide chassis assembly.

1.Remove the band attaching the wire to the head.

2.Remove the two screws D, the head and the head support spring.

3.Remove the pinch arm spring from the tape guide.

4.Remove the tape guide and the pinch spring arm.

CAUTION: When reattaching the pinch arm spring, set both end of it to the pinch spring arm ( remarked r).

CAUTION: When reattaching the head, set the wires into the groove of the tape guide (Fig.18).

Removing the flywheel assembly (F) & (R) (See Fig.20 and 21)

REFERENCE:It is not necessary to remove the slide chassis assembly.

1.Remove the belt at the bottom.

2.Remove the two polywashers on the upper side.

3.Pull out each flywheel assembly downward.

Flywheel assembly (F) Belt

KS-FX725R

D

Slide chassis assembly

Head

Tape guide

Fig.18

D

Pinch arm spring

Head

Head support spring

Tape guide

r

Pinch spring arm

r

Slid chassis assembly

Fig.19

Polywasher

Polywasher

Flywheel assembly (F)

Flywheel assembly (R)	Flywheel assembly (R)
Fig.20
	Fig.21

1-11