JVC KS-FX725R service manual Removing the main motor assembly / sub motor assembly See to

Removing the main motor assembly / sub motor assembly (See Fig.42 to 44)

1.Remove the belt at the bottom.

2.Remove the polywasher and pull out the mode gear.

3.Pull out the reduction gear (B).

4.Remove the polywasher and pull out the reduction gear (A).

5.Remove the two screws F attaching the main motor assembly.

6.Remove the two screws G attaching the sub motor assembly.

7.Unsolder the wires on the reel board if necessary.

CAUTION: When reassembling, adjust the length of the wires extending from the sub motor asswmbly by attaching them to the side of the sub motor assembly with the wires extending from the main motor assembly using a spacer.

KS-FX725R

F	Main motor
	assembly

Reduction gear (B)

Belt

Reduction gear (A)

Polywasher

Sub motor assembly

G

Mode gear

Polywasher

Fig.42

Reduction gear (B)

Polywasher

Reduction gear (A)

GF

Spacer

Main motor assembly

Sub motor assembly

Fig.43

Main motor assembly

Sub motor assembly Spacer

Fig.44

1-17