JVC KS-FX725R service manual Removing the reel driver / reel spindle See

Removing the gear base assembly / take up gear / reflector gear (See Fig.34 to 36)

1.Push in the pin e’ of the gear base assembly on the upper side of the body and move the reflector gear toward the bottom, then pull out.

2.Remove the polywasher on the bottom and pull out the take up gear.

3.Move the gear base assembly in the direction of the arrow to release it from the two slots f’ of the main chassis.

Gear base assembly Pin e'

KS-FX725R

Slot f'

Slot f'

REFERENCE: The parts are damaged when removed.

Please replace with new ones.

Fig.34

Polywasher Take up gear

Reflector gear

Removing the reel driver / reel spindle (See Fig.36)

1.Draw out the reel driver from the shaft on the main chassis and remove the reel driver spring and the reel spindle respectively.

CAUTION: The reel driver is damaged when removed. Please replace with a new one.

Reel driver

Reel driver spring

Reel spindle

Main chassis

Reflector gear

Fig.35

Reel driver

Reel driver spring

Reel spindle

Gear base assembly

Slots f’

Take up gear

Polywasher

Fig.36

1-15