JVC KS-FX725R service manual Removing the load arm See

KS-FX725R

Removing the load arm (See Fig.5)

1.Remove the E-washer attaching the load arm.

2.Move the load arm in the direction of the arrow and release the joint e on the cassette catch.

Removing the cassette hanger assembly / cassette holder (See Fig.6 to 9)

1.Check the mode is set to EJECT. Push down the front part of the cassette holder and move in the direction of the arrow to release the joint f.

2.Move the rear part of the cassette hanger assembly in the direction of the arrow to release it from the two joint bosses g.

3.Release the holder stabilizer spring from the hooks h and i, then pull out from the cassette hanger assembly.

4.Bring up the rear side of the cassette hanger assembly to release the joint j and k.

5.Pull out the cassette catch from the cassette hanger assembly.

Load arm

E-washer

Joint e

Fig.5

Cassette holder assembly

Side bracket

Joints f

Cassette holder assembly

Fig.6

Cassette stabilizer spring

Hook h

Boss g

Cassette hanger assembly

Boss g

Cassette hanger assembly

Hook i

Fig.7

Cassette hanger assembly

Cassette holder	Cassette catch
assembly

Cassette holder assembly

Cassette hanger assembly

Hook j

Hook k

Fig.8 Fig.9

1-8